English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Aerial Drop Hardware, Anchoring Clamp
- CWPAG-15 Aluminum Alloy Overhead Cable Clamp for 4-Core ABC Cable
Choose the CWPAG-15 overhead cable clamp for tension anchoring compatible 4-core ABC cable in low-voltage distribution systems. The listed cross-section is 16–35 mm², with galvanized steel and aluminum construction. Send your cable dimensions and load requirements for selection confirmation.
Choose the CWPAG-15 overhead cable clamp for tension anchoring compatible 4-core ABC cable in low-voltage distribution systems. The listed cross-section is 16–35 mm², with galvanized steel and aluminum construction. Send your cable dimensions and load requirements for selection confirmation.
Choose the CWPAG-15 overhead cable clamp for tension anchoring your compatible four-core aerial bundled cable (ABC). The listed cable cross-section is 16–35 mm². Its material specification combines galvanized steel and aluminum for low-voltage overhead distribution applications.
You can source this model for utility supply, electrical contracting or wholesale inventory. Before ordering, provide your cable construction and insulated conductor diameters so we can confirm the fit and attachment arrangement.
| Specification | CWPAG-15 |
|---|---|
| Product | Aluminum alloy overhead cable clamp for 4-core ABC cable |
| Application | Cable tension anchoring in low-voltage overhead distribution systems |
| Listed cable cross-section | 16–35 mm² |
| Materials | Galvanized steel and aluminum |
| Surface treatment | Galvanized; confirm the component coverage and finish requirements for your order |
| Packaging | Inner plastic bag, carton and pallet |
Understand the range: mm² measures conductor cross-sectional area, not outside diameter. Confirm the size of each core and the complete bundle arrangement when submitting your cable datasheet.
The specification does not list a numerical breaking load or working load. Request these values and the applicable test conditions before approving the clamp for your project.
Use this overhead cable clamp for compatible four-core ABC tension-anchoring points in low-voltage power distribution. Typical project settings include residential supply networks, rural electrification and distribution network maintenance.
First, compare your conductor cross-sections with the listed 16–35 mm² range. Next, provide the insulated core diameters, bundle layout and support drawing. A matching cross-section alone does not establish a correct mechanical fit.
Also, confirm the required service load and attachment function with your project design. Do not assume that a clamp for anchoring an entire four-core bundle can replace a fitting designed to grip only an insulated neutral messenger.
Request the model-specific installation instructions before your crew begins. Use the following information to prepare the selection and installation review:
Confirm the required tools and any tightening settings from the installation instructions. Do not assume a tool-free or shear-head nut procedure from another clamp model.
Hbcrownwealth is a professional manufacturer, supplier and wholesaler of aerial cable hardware in China. We supply overhead power and telecommunications hardware for distributors, contractors and utility projects.
Our quality control process includes raw material inspection, dimensional checks, appearance inspection, assembly verification, mechanical performance testing and final shipment inspection. Specify your acceptance criteria and required test documentation during quotation so we can confirm the inspection scope for your order.
You can submit drawings, samples or technical requirements for OEM/ODM review. The available development areas include dimensions, material requirements, cable compatibility, surface treatment, product markings, branding and packaging. We confirm feasibility and the final specification before production.
For wholesale orders, share your quantity and purchasing schedule so we can plan efficient production. In addition, provide your delivery destination and target date for fast, reliable logistics planning. Our 24-hour one-to-one service supports your product selection, quotations and order coordination.
It is intended for compatible four-core ABC cable in low-voltage overhead distribution systems. Send your cable datasheet and bundle arrangement for fit confirmation.
No. It is the listed conductor cross-sectional range. Provide the insulated conductor diameters separately when requesting a quotation.
The listed materials are galvanized steel and aluminum, with galvanized surface treatment. Confirm the component-specific finish and any coating requirements for your order.
A numerical breaking load is not specified on this page. Send your project load requirements and request the confirmed rating and relevant test information before selection.
The listed packing is an inner plastic bag, carton and pallet. Confirm carton quantities, pallet dimensions and shipping details in your quotation.
Yes. Hbcrownwealth offers OEM/ODM review for your drawings, samples and requirements. We confirm the available changes, specification and order terms before production.
Contact Hbcrownwealth with your four-core cable datasheet, conductor sizes, insulated diameters, required load, quantity and delivery destination. Include the support drawing and any finish, inspection or packing requirements.
Explore our anchoring clamp range for other cable sizes, or review pole line hardware for your support arrangement. Confirm cable fit and load compatibility for each selected component.
| Specification | CWPAG-15 |
|---|---|
| Product | Aluminum alloy overhead cable clamp for 4-core ABC cable |
| Application | Cable tension anchoring in low-voltage overhead distribution systems |
| Listed cable cross-section | 16–35 mm² |
| Materials | Galvanized steel and aluminum |
| Surface treatment | Galvanized; confirm the component coverage and finish requirements for your order |
| Packaging | Inner plastic bag, carton and pallet |
Cross-section, not diameter: The 16–35 mm² value is the listed conductor cross-sectional range. Provide your four-core cable specification and insulated conductor diameters to confirm fit.
Request the breaking load, allowable service load and model-specific installation instructions for your project. These numerical load ratings are not specified here. Include your bundle arrangement, support drawing, route loading and required finish details in the inquiry.
Choose the CWPAG-15 overhead cable clamp for tension anchoring your compatible four-core aerial bundled cable (ABC). The listed cable cross-section is 16–35 mm². Its material specification combines galvanized steel and aluminum for low-voltage overhead distribution applications.
You can source this model for utility supply, electrical contracting or wholesale inventory. Before ordering, provide your cable construction and insulated conductor diameters so we can confirm the fit and attachment arrangement.
| Specification | CWPAG-15 |
|---|---|
| Product | Aluminum alloy overhead cable clamp for 4-core ABC cable |
| Application | Cable tension anchoring in low-voltage overhead distribution systems |
| Listed cable cross-section | 16–35 mm² |
| Materials | Galvanized steel and aluminum |
| Surface treatment | Galvanized; confirm the component coverage and finish requirements for your order |
| Packaging | Inner plastic bag, carton and pallet |
Understand the range: mm² measures conductor cross-sectional area, not outside diameter. Confirm the size of each core and the complete bundle arrangement when submitting your cable datasheet.
The specification does not list a numerical breaking load or working load. Request these values and the applicable test conditions before approving the clamp for your project.
Use this overhead cable clamp for compatible four-core ABC tension-anchoring points in low-voltage power distribution. Typical project settings include residential supply networks, rural electrification and distribution network maintenance.
First, compare your conductor cross-sections with the listed 16–35 mm² range. Next, provide the insulated core diameters, bundle layout and support drawing. A matching cross-section alone does not establish a correct mechanical fit.
Also, confirm the required service load and attachment function with your project design. Do not assume that a clamp for anchoring an entire four-core bundle can replace a fitting designed to grip only an insulated neutral messenger.
Request the model-specific installation instructions before your crew begins. Use the following information to prepare the selection and installation review:
Confirm the required tools and any tightening settings from the installation instructions. Do not assume a tool-free or shear-head nut procedure from another clamp model.
Hbcrownwealth is a professional manufacturer, supplier and wholesaler of aerial cable hardware in China. We supply overhead power and telecommunications hardware for distributors, contractors and utility projects.
Our quality control process includes raw material inspection, dimensional checks, appearance inspection, assembly verification, mechanical performance testing and final shipment inspection. Specify your acceptance criteria and required test documentation during quotation so we can confirm the inspection scope for your order.
You can submit drawings, samples or technical requirements for OEM/ODM review. The available development areas include dimensions, material requirements, cable compatibility, surface treatment, product markings, branding and packaging. We confirm feasibility and the final specification before production.
For wholesale orders, share your quantity and purchasing schedule so we can plan efficient production. In addition, provide your delivery destination and target date for fast, reliable logistics planning. Our 24-hour one-to-one service supports your product selection, quotations and order coordination.
It is intended for compatible four-core ABC cable in low-voltage overhead distribution systems. Send your cable datasheet and bundle arrangement for fit confirmation.
No. It is the listed conductor cross-sectional range. Provide the insulated conductor diameters separately when requesting a quotation.
The listed materials are galvanized steel and aluminum, with galvanized surface treatment. Confirm the component-specific finish and any coating requirements for your order.
A numerical breaking load is not specified on this page. Send your project load requirements and request the confirmed rating and relevant test information before selection.
The listed packing is an inner plastic bag, carton and pallet. Confirm carton quantities, pallet dimensions and shipping details in your quotation.
Yes. Hbcrownwealth offers OEM/ODM review for your drawings, samples and requirements. We confirm the available changes, specification and order terms before production.
Contact Hbcrownwealth with your four-core cable datasheet, conductor sizes, insulated diameters, required load, quantity and delivery destination. Include the support drawing and any finish, inspection or packing requirements.
Explore our anchoring clamp range for other cable sizes, or review pole line hardware for your support arrangement. Confirm cable fit and load compatibility for each selected component.
| Specification | CWPAG-15 |
|---|---|
| Product | Aluminum alloy overhead cable clamp for 4-core ABC cable |
| Application | Cable tension anchoring in low-voltage overhead distribution systems |
| Listed cable cross-section | 16–35 mm² |
| Materials | Galvanized steel and aluminum |
| Surface treatment | Galvanized; confirm the component coverage and finish requirements for your order |
| Packaging | Inner plastic bag, carton and pallet |
Cross-section, not diameter: The 16–35 mm² value is the listed conductor cross-sectional range. Provide your four-core cable specification and insulated conductor diameters to confirm fit.
Request the breaking load, allowable service load and model-specific installation instructions for your project. These numerical load ratings are not specified here. Include your bundle arrangement, support drawing, route loading and required finish details in the inquiry.
