Electric Pole Accessories

CW-QSCF Q Span Clamp with Gripper Finger

Choose the CW-QSCF Q Span Clamp with gripper finger for your compatible messenger attachment. Its galvanized steel construction, pigtail configuration and 1/4–1/2 inch strand range help you specify the required fitting.

CW-QSCF Q Span Clamp with Gripper Finger

Choose the CW-QSCF Q Span Clamp with gripper finger for your compatible messenger attachment. Its galvanized steel construction, pigtail configuration and 1/4–1/2 inch strand range help you specify the required fitting.

CW-QSCF Q Span Clamp with Gripper Finger

Choose the CW-QSCF Q Span Clamp when you need a galvanized steel messenger attachment in the gripper finger configuration. This Q-type span clamp has a pigtail attachment and a listed strand range of 1/4–1/2 inch, equivalent to 6.35–12.7 mm.

First, check your messenger size and construction. Then compare the clamp drawing and connection geometry with the hardware you intend to attach. This helps you specify the correct version for your aerial installation.

Product Advantages

  • Defined messenger range: You can check strand compatibility against the listed 1/4–1/2 inch range.
  • Gripper finger version: The CW-QSCF designation identifies the configuration you need when comparing Q-type span clamps.
  • Pigtail attachment: You can review the connection shape against your intended attachment hardware before ordering.
  • Galvanized steel construction: The specified material gives you a clear starting point for coating and inspection requirements.
  • Clear procurement identification: Use the full model number on drawings and purchase orders to distinguish this version from other span clamps.

CW-QSCF Specifications

Item Specification
Model CW-QSCF
Product Q Span Clamp with Gripper Finger
Material Galvanized steel
Strand size 1/4–1/2 inch (6.35–12.7 mm)
Configuration Q-type, gripper finger version; pigtail attachment
Intended mounting element Messenger wire or strand

The listed range applies to the messenger strand, not the outside diameter of a drop cable. Confirm the drawing, attachment fit, installation requirements and applicable load data before ordering.

Applications

Use this messenger strand clamp in aerial cable installations where the project specifies a compatible Q-type pigtail attachment. Your support strand and connected hardware must suit the approved arrangement.

For telecommunications drop projects, review the drop wire clamp range separately. A span clamp mounts on the messenger; it does not establish which drop clamp fits your optical or telephone cable.

Using Your Q Span Clamp

Before installation, obtain the current CW-QSCF drawing and instructions. The original product listing does not provide a tightening torque, working-load rating or detailed installation sequence.

  1. Check the strand. Confirm its diameter, construction and condition against the selected clamp requirements.
  2. Check the attachment. Compare the pigtail and gripper finger arrangement with your intended connection and available clearance.
  3. Confirm installation requirements. Request the fastening method, required tools and tightening instructions for the supplied assembly.
  4. Review the completed connection. Follow the project inspection procedure for seating, fastening and alignment before placing it into service.

Also, confirm the project loads and any required test evidence. Do not infer a breaking load, maximum span or installation torque from the strand range.

Frequently Asked Questions

What strand diameter does the CW-QSCF accept?

The listed range is 1/4–1/2 inch, or 6.35–12.7 mm. Confirm the messenger construction and attachment details as well as its diameter.

What does the gripper finger description identify?

It identifies this Q span clamp version. Use CW-QSCF and the current drawing when requesting a quote so you can confirm the exact geometry.

Is this clamp made from stainless steel?

No. The original specification lists galvanized steel. Request the coating details and material information required by your project.

Can you substitute it for the E span clamp?

Only after checking compatibility. The CW-ESC E span clamp is a separate configuration. Compare strand range, attachment geometry and performance information before substitution.

What is its breaking load?

The original listing does not specify an assembly breaking load. Send your load requirements and request the relevant CW-QSCF test information before approval.

What should you provide for a wholesale quotation?

Send the model, messenger details, attachment drawing, quantity and destination. Include coating, inspection and packaging requirements so your quotation reflects the complete supply scope.

Efficient Production and Consistent Quality

Hbcrownwealth supports efficient production planning for your span clamp orders. Provide quantities and your procurement schedule so we can confirm production arrangements and delivery expectations.

Our quality focus is on supplying products that match the agreed specification. Confirm the component dimensions, attachment geometry and finish before production, especially when replacing an existing fitting.

Strict Quality Control and Relevant Testing

We support your quality requirements through production control and relevant testing. For this galvanized steel span clamp, agree on dimensional, assembly and coating inspection criteria during quotation.

Request the available mechanical or coating test information that applies to CW-QSCF. Match each report to the supplied configuration and acceptance requirements rather than treating test results from another span clamp as interchangeable.

OEM/ODM Service and Logistics

You can submit drawings, samples or customization requirements for OEM/ODM feasibility review. We confirm proposed changes and supply terms before production.

For fast, reliable logistics coordination, share your destination, packaging needs and target delivery date. Then confirm the production lead time and shipment plan with your quotation. Our 24-hour one-to-one service helps you coordinate technical questions and order details.

Your Span Clamp Supplier and Wholesaler in China

Hbcrownwealth is a professional span clamp manufacturer, supplier and wholesaler in China. We supply overhead cable hardware for power and telecommunications systems and support project procurement and wholesale distribution.

Explore our span clamp options to compare configurations. For this model, request a CW-QSCF Q span clamp quotation with your messenger details, drawing and order quantity.

CW-QSCF Specifications

Item Specification
Model CW-QSCF
Product Q Span Clamp with Gripper Finger
Material Galvanized steel
Strand size 1/4–1/2 inch (6.35–12.7 mm)
Configuration Q-type, gripper finger version; pigtail attachment
Intended mounting element Messenger wire or strand

The listed range applies to the messenger strand, not the outside diameter of a drop cable. Confirm the drawing, attachment fit, installation requirements and applicable load data before ordering.

CW-QSCF Q Span Clamp with Gripper Finger

Choose the CW-QSCF Q Span Clamp when you need a galvanized steel messenger attachment in the gripper finger configuration. This Q-type span clamp has a pigtail attachment and a listed strand range of 1/4–1/2 inch, equivalent to 6.35–12.7 mm.

First, check your messenger size and construction. Then compare the clamp drawing and connection geometry with the hardware you intend to attach. This helps you specify the correct version for your aerial installation.

Product Advantages

  • Defined messenger range: You can check strand compatibility against the listed 1/4–1/2 inch range.
  • Gripper finger version: The CW-QSCF designation identifies the configuration you need when comparing Q-type span clamps.
  • Pigtail attachment: You can review the connection shape against your intended attachment hardware before ordering.
  • Galvanized steel construction: The specified material gives you a clear starting point for coating and inspection requirements.
  • Clear procurement identification: Use the full model number on drawings and purchase orders to distinguish this version from other span clamps.

CW-QSCF Specifications

Item Specification
Model CW-QSCF
Product Q Span Clamp with Gripper Finger
Material Galvanized steel
Strand size 1/4–1/2 inch (6.35–12.7 mm)
Configuration Q-type, gripper finger version; pigtail attachment
Intended mounting element Messenger wire or strand

The listed range applies to the messenger strand, not the outside diameter of a drop cable. Confirm the drawing, attachment fit, installation requirements and applicable load data before ordering.

Applications

Use this messenger strand clamp in aerial cable installations where the project specifies a compatible Q-type pigtail attachment. Your support strand and connected hardware must suit the approved arrangement.

For telecommunications drop projects, review the drop wire clamp range separately. A span clamp mounts on the messenger; it does not establish which drop clamp fits your optical or telephone cable.

Using Your Q Span Clamp

Before installation, obtain the current CW-QSCF drawing and instructions. The original product listing does not provide a tightening torque, working-load rating or detailed installation sequence.

  1. Check the strand. Confirm its diameter, construction and condition against the selected clamp requirements.
  2. Check the attachment. Compare the pigtail and gripper finger arrangement with your intended connection and available clearance.
  3. Confirm installation requirements. Request the fastening method, required tools and tightening instructions for the supplied assembly.
  4. Review the completed connection. Follow the project inspection procedure for seating, fastening and alignment before placing it into service.

Also, confirm the project loads and any required test evidence. Do not infer a breaking load, maximum span or installation torque from the strand range.

Frequently Asked Questions

What strand diameter does the CW-QSCF accept?

The listed range is 1/4–1/2 inch, or 6.35–12.7 mm. Confirm the messenger construction and attachment details as well as its diameter.

What does the gripper finger description identify?

It identifies this Q span clamp version. Use CW-QSCF and the current drawing when requesting a quote so you can confirm the exact geometry.

Is this clamp made from stainless steel?

No. The original specification lists galvanized steel. Request the coating details and material information required by your project.

Can you substitute it for the E span clamp?

Only after checking compatibility. The CW-ESC E span clamp is a separate configuration. Compare strand range, attachment geometry and performance information before substitution.

What is its breaking load?

The original listing does not specify an assembly breaking load. Send your load requirements and request the relevant CW-QSCF test information before approval.

What should you provide for a wholesale quotation?

Send the model, messenger details, attachment drawing, quantity and destination. Include coating, inspection and packaging requirements so your quotation reflects the complete supply scope.

Efficient Production and Consistent Quality

Hbcrownwealth supports efficient production planning for your span clamp orders. Provide quantities and your procurement schedule so we can confirm production arrangements and delivery expectations.

Our quality focus is on supplying products that match the agreed specification. Confirm the component dimensions, attachment geometry and finish before production, especially when replacing an existing fitting.

Strict Quality Control and Relevant Testing

We support your quality requirements through production control and relevant testing. For this galvanized steel span clamp, agree on dimensional, assembly and coating inspection criteria during quotation.

Request the available mechanical or coating test information that applies to CW-QSCF. Match each report to the supplied configuration and acceptance requirements rather than treating test results from another span clamp as interchangeable.

OEM/ODM Service and Logistics

You can submit drawings, samples or customization requirements for OEM/ODM feasibility review. We confirm proposed changes and supply terms before production.

For fast, reliable logistics coordination, share your destination, packaging needs and target delivery date. Then confirm the production lead time and shipment plan with your quotation. Our 24-hour one-to-one service helps you coordinate technical questions and order details.

Your Span Clamp Supplier and Wholesaler in China

Hbcrownwealth is a professional span clamp manufacturer, supplier and wholesaler in China. We supply overhead cable hardware for power and telecommunications systems and support project procurement and wholesale distribution.

Explore our span clamp options to compare configurations. For this model, request a CW-QSCF Q span clamp quotation with your messenger details, drawing and order quantity.

CW-QSCF Specifications

Item Specification
Model CW-QSCF
Product Q Span Clamp with Gripper Finger
Material Galvanized steel
Strand size 1/4–1/2 inch (6.35–12.7 mm)
Configuration Q-type, gripper finger version; pigtail attachment
Intended mounting element Messenger wire or strand

The listed range applies to the messenger strand, not the outside diameter of a drop cable. Confirm the drawing, attachment fit, installation requirements and applicable load data before ordering.

Related Products

pole line hardware suppliers

GET IN TOUCH


Send Your Inquiry Today