English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Drop Wire Clamp
- CW-LFWC: Large (2- 6) Aluminum Wedge Clamp | Service Wedge Clamp
The Aluminum Service Wedge Clamp is designed for dead-ending self-supporting service drop conductors in overhead electrical distribution systems.
The CW-LFWC uses an aluminum wedge-and-slider body with a flexible bail, allowing the clamp to grip the conductor mechanically while providing a practical attachment point for service entrance and overhead drop applications.
Feature:
Reduce the pressure of overhead cable sagging
Corrosion resistant
Sturdy and durable
Easy to install
Various sizes
The Aluminum Service Wedge Clamp is designed for dead-ending self-supporting service drop conductors in overhead electrical distribution systems.
The CW-LFWC uses an aluminum wedge-and-slider body with a flexible bail, allowing the clamp to grip the conductor mechanically while providing a practical attachment point for service entrance and overhead drop applications.
Feature:
Reduce the pressure of overhead cable sagging
Corrosion resistant
Sturdy and durable
Easy to install
Various sizes
Hbcrownwealth supplies aluminum service wedge clamps for electrical utilities, distributors, contractors, wholesalers, and overhead line projects.
*Use the confirmed Hbcrownwealth test/specification value for final technical documentation.
An Aluminum Service Wedge Clamp is a mechanical dead-end fitting used to secure an overhead service conductor while maintaining the required tension in the span.
The conductor passes through the aluminum wedge-and-slider assembly. As tension is applied, the wedge grips the conductor and helps prevent it from slipping.
A flexible bail connects the clamp assembly to the appropriate attachment point.
This type of clamp is widely used for:
Major North American service-wedge systems use the same basic principle for dead-ending self-supporting drop wire and gripping ACSR, AAAC, and aluminum conductors.
The clamp works through a wedge-locking principle.
First, the conductor is positioned inside the aluminum wedge assembly.
As tension increases, the wedge moves into the clamp body and creates stronger mechanical contact with the conductor.
This helps maintain conductor position without requiring a complicated fastening process.
The flexible bail then provides the connection between the wedge clamp and the supporting structure.
Because of this design, installers can adjust the service conductor length and sag before completing the dead-end connection.
The CW-LFWC is designed for the 2-6 conductor range.
Depending on the confirmed project specification, it can be used with:
ACSR combines aluminum conductors with a steel-reinforced core and is widely used in overhead electrical distribution.
The wedge design provides mechanical grip while accommodating the conductor geometry.
AAAC is manufactured from aluminum alloy and provides good conductivity, corrosion resistance, and mechanical performance for overhead networks.
The clamp can also be used with applicable aluminum conductors within the confirmed size range.
For every project, confirm the exact conductor material, construction, and diameter before ordering.
The flexible bail is one of the main features that should distinguish this page from your other 2-6 wedge clamp page.
The flexible structure provides installation freedom when connecting the clamp to the attachment point.
Flexible-bail designs are commonly used in overhead service wedge clamp systems where installers need practical positioning during conductor dead-ending.
Utility poles and service attachment points may not always have exactly the same geometry. A flexible bail can make field positioning easier.
Industry service wedge clamp catalogs specifically distinguish flexible bail models from rigid-bail models.
Verify that the conductor type and size are compatible with the CW-LFWC.
Do not use the clamp with a conductor outside the specified range.
Check the aluminum body, wedge, slider, and flexible bail before installation.
Do not install damaged or deformed components.
Place the conductor correctly inside the wedge assembly.
Set the required conductor length and sag according to the project design.
Position the wedge so the conductor is gripped evenly.
Connect the bail to the approved service attachment point.
Apply the required line tension gradually and confirm that the wedge grips the conductor correctly.
Check that:
Different utilities and markets may use different conductor ranges and wedge clamp designs.
Hbcrownwealth can support OEM production according to your:
Customization may include:
If you are replacing an existing service wedge clamp, send us the current model number or technical drawing so we can compare specifications.
Hbcrownwealth supplies service wedge clamps, drop wire clamps, anchor clamps, suspension clamps, and other aerial cable hardware.
You can source different conductor ranges for various overhead service and distribution applications.
Hbcrownwealth can customize the clamp according to conductor size, bail structure, drawings, or project specifications.
We inspect materials, dimensions, wedge assemblies, bail structures, and finished products before shipment.
You can purchase wedge clamps together with other pole and aerial drop hardware from one supplier.
Hbcrownwealth supports electrical distributors, importers, contractors, utility companies, and infrastructure projects.
An Aluminum Service Wedge Clamp is a mechanical fitting used to dead-end self-supporting overhead service conductors through a wedge gripping mechanism.
It refers to the compatible conductor size range. The exact range depends on conductor material and construction, so you should confirm the ACSR, AAAC, and aluminum conductor specifications before ordering.
Yes. The CW-LFWC is designed for applicable 2-6 ACSR conductors according to the confirmed product specification.
Yes. It can be used with compatible AAAC conductors in the specified size range.
A flexible bail wedge clamp uses a flexible connecting loop instead of a rigid bail. This provides greater freedom when positioning the clamp at the attachment point.
The current Hbcrownwealth specification lists 1,600 lbs for the CW-LFWC.
The current specification lists approximately 0.14 lbs per clamp.
The aluminum construction provides good corrosion resistance for normal outdoor service conditions.
Yes. Hbcrownwealth can evaluate customized conductor ranges, bail designs, dimensions, markings, mechanical requirements, and packaging.
Yes. Send the manufacturer part number, specification sheet, drawing, or sample, and Hbcrownwealth can evaluate a compatible solution.
| Parts No. | Description | Strength | Weight |
| CW-LFWC | Large (2-6) Flexible Wedge Clamp | 1,600 lbs | 0.14 Lbs. (Each) |
Hbcrownwealth supplies aluminum service wedge clamps for electrical utilities, distributors, contractors, wholesalers, and overhead line projects.
*Use the confirmed Hbcrownwealth test/specification value for final technical documentation.
An Aluminum Service Wedge Clamp is a mechanical dead-end fitting used to secure an overhead service conductor while maintaining the required tension in the span.
The conductor passes through the aluminum wedge-and-slider assembly. As tension is applied, the wedge grips the conductor and helps prevent it from slipping.
A flexible bail connects the clamp assembly to the appropriate attachment point.
This type of clamp is widely used for:
Major North American service-wedge systems use the same basic principle for dead-ending self-supporting drop wire and gripping ACSR, AAAC, and aluminum conductors.
The clamp works through a wedge-locking principle.
First, the conductor is positioned inside the aluminum wedge assembly.
As tension increases, the wedge moves into the clamp body and creates stronger mechanical contact with the conductor.
This helps maintain conductor position without requiring a complicated fastening process.
The flexible bail then provides the connection between the wedge clamp and the supporting structure.
Because of this design, installers can adjust the service conductor length and sag before completing the dead-end connection.
The CW-LFWC is designed for the 2-6 conductor range.
Depending on the confirmed project specification, it can be used with:
ACSR combines aluminum conductors with a steel-reinforced core and is widely used in overhead electrical distribution.
The wedge design provides mechanical grip while accommodating the conductor geometry.
AAAC is manufactured from aluminum alloy and provides good conductivity, corrosion resistance, and mechanical performance for overhead networks.
The clamp can also be used with applicable aluminum conductors within the confirmed size range.
For every project, confirm the exact conductor material, construction, and diameter before ordering.
The flexible bail is one of the main features that should distinguish this page from your other 2-6 wedge clamp page.
The flexible structure provides installation freedom when connecting the clamp to the attachment point.
Flexible-bail designs are commonly used in overhead service wedge clamp systems where installers need practical positioning during conductor dead-ending.
Utility poles and service attachment points may not always have exactly the same geometry. A flexible bail can make field positioning easier.
Industry service wedge clamp catalogs specifically distinguish flexible bail models from rigid-bail models.
Verify that the conductor type and size are compatible with the CW-LFWC.
Do not use the clamp with a conductor outside the specified range.
Check the aluminum body, wedge, slider, and flexible bail before installation.
Do not install damaged or deformed components.
Place the conductor correctly inside the wedge assembly.
Set the required conductor length and sag according to the project design.
Position the wedge so the conductor is gripped evenly.
Connect the bail to the approved service attachment point.
Apply the required line tension gradually and confirm that the wedge grips the conductor correctly.
Check that:
Different utilities and markets may use different conductor ranges and wedge clamp designs.
Hbcrownwealth can support OEM production according to your:
Customization may include:
If you are replacing an existing service wedge clamp, send us the current model number or technical drawing so we can compare specifications.
Hbcrownwealth supplies service wedge clamps, drop wire clamps, anchor clamps, suspension clamps, and other aerial cable hardware.
You can source different conductor ranges for various overhead service and distribution applications.
Hbcrownwealth can customize the clamp according to conductor size, bail structure, drawings, or project specifications.
We inspect materials, dimensions, wedge assemblies, bail structures, and finished products before shipment.
You can purchase wedge clamps together with other pole and aerial drop hardware from one supplier.
Hbcrownwealth supports electrical distributors, importers, contractors, utility companies, and infrastructure projects.
An Aluminum Service Wedge Clamp is a mechanical fitting used to dead-end self-supporting overhead service conductors through a wedge gripping mechanism.
It refers to the compatible conductor size range. The exact range depends on conductor material and construction, so you should confirm the ACSR, AAAC, and aluminum conductor specifications before ordering.
Yes. The CW-LFWC is designed for applicable 2-6 ACSR conductors according to the confirmed product specification.
Yes. It can be used with compatible AAAC conductors in the specified size range.
A flexible bail wedge clamp uses a flexible connecting loop instead of a rigid bail. This provides greater freedom when positioning the clamp at the attachment point.
The current Hbcrownwealth specification lists 1,600 lbs for the CW-LFWC.
The current specification lists approximately 0.14 lbs per clamp.
The aluminum construction provides good corrosion resistance for normal outdoor service conditions.
Yes. Hbcrownwealth can evaluate customized conductor ranges, bail designs, dimensions, markings, mechanical requirements, and packaging.
Yes. Send the manufacturer part number, specification sheet, drawing, or sample, and Hbcrownwealth can evaluate a compatible solution.
| Parts No. | Description | Strength | Weight |
| CW-LFWC | Large (2-6) Flexible Wedge Clamp | 1,600 lbs | 0.14 Lbs. (Each) |
