English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Drop Wire Clamp
- 304 Stainless Steel Drop Wire Clamp with Serrated Shim | CW-2PRXP
Support your one-pair or two-pair telephone drop wire with the Hbcrownwealth CW-2PRXP stainless steel drop wire clamp. Its 304 stainless steel body and tail wire combine with a serrated shim for grip on compatible cable.
Use it with suitable span clamps, drive hooks, and other drop attachments. Confirm your cable dimensions, mounting arrangement, and load requirements before ordering.
Support your one-pair or two-pair telephone drop wire with the Hbcrownwealth CW-2PRXP stainless steel drop wire clamp. Its 304 stainless steel body and tail wire combine with a serrated shim for grip on compatible cable.
Use it with suitable span clamps, drive hooks, and other drop attachments. Confirm your cable dimensions, mounting arrangement, and load requirements before ordering.
The Hbcrownwealth CW-2PRXP stainless steel drop wire clamp supports one-pair and two-pair telephone drop wire at compatible span clamps, drive hooks, and other drop attachments. Its assembly combines a shell, serrated shim, and wedge equipped with a tail wire.
You can specify this model for aerial telephone service connections or replacement work that requires this clamp design. Start with your cable dimensions and attachment details, then confirm the load requirements for your route before ordering.
The body and tail wire use 304 stainless steel. This gives you a defined material specification when comparing quotations or preparing your purchasing requirements. If your project requires material certificates or exposure testing, state those requirements in your inquiry.
The serrated shim increases the hold on compatible drop wire. Specify the serrated-shim configuration when ordering CW-2PRXP so your purchasing documents identify the correct assembly. Cable jacket construction and dimensions remain important to the selection.
The clamp uses a shell, shim, and wedge with a tail wire. When replacing existing hardware, compare the complete assembly with your current clamp. This helps you identify differences in cable fit and attachment geometry before placing a bulk order.
You can use this model with compatible span clamps, drive hooks, and other telephone drop attachments. Check the connection dimensions rather than assuming that every hook or support will fit. For replacement projects, provide photographs alongside the relevant dimensions.
This product is specified for telephone drop wire. If you need hardware for fiber optic or other cable types, request a separate compatibility assessment or compare our drop wire clamp range.
Follow the approved installation instructions for the complete assembly. Do not select a working tension or span from the material grade or product appearance alone.
Hbcrownwealth is a manufacturer, supplier, and wholesaler of hardware for aerial cable, power, and telecom systems. For this product, use the model number and confirmed configuration to keep your quotation, technical review, and purchase order consistent.
For a wholesale inquiry, include your quantity, destination, and required delivery date. Also identify any sample evaluation, material documentation, inspection, or packing requirements so you can confirm the available arrangements and order terms before purchase.
It supports one-pair and two-pair telephone drop wire at compatible aerial drop attachments. You can use it with suitable span clamps, drive hooks, and other support hardware. Confirm your cable dimensions and connection details before specifying it for a new installation or replacement.
Both the body and tail wire are made from 304 stainless steel. Include this grade in your inquiry and purchase specification. If your project requires material verification, request the relevant documentation and confirm its availability before ordering.
The confirmed CW-2PRXP configuration uses a serrated shim. Its serrated surface increases the hold on compatible drop wire. If your specification calls for a neoprene shim, request a separately confirmed product configuration instead of treating the two shim types as interchangeable.
Send your cable dimensions, pair count, jacket information, and cross-sectional drawing. Pair count alone does not establish the cable fit. For replacement work, include the existing clamp details so you can compare both the gripping arrangement and the support connection.
Fiber optic cable compatibility requires separate confirmation. The stated application for CW-2PRXP is one-pair and two-pair telephone drop wire. Provide your fiber cable profile and installation requirements to request an appropriate clamp selection.
You can use compatible span clamps, drive hooks, and other drop attachments. Compare the tail-wire connection with the support fitting dimensions before purchase. Also confirm whether the quotation covers only the clamp or includes any additional mounting hardware.
You need confirmed ratings for your selected cable and clamp arrangement before specifying either value. Request the load rating, its units, test conditions, and applicable installation guidance. A pull-test result should not be treated as an allowable working load without the relevant selection criteria.
Send the CW-2PRXP model number, required quantity, cable details, and delivery destination. Specify the 304 stainless steel body and tail wire with a serrated shim. Then list any sample, documentation, packing, or delivery requirements and request confirmation of the minimum order quantity and lead time.
Contact Hbcrownwealth with your cable drawing, mounting details, and order quantity. Include your load requirements and installation environment so you can confirm the correct drop wire clamp configuration and supply terms for your project.
| Item | Specification |
|---|---|
| Model | CW-2PRXP |
| Product type | Telephone drop wire clamp |
| Body material | 304 stainless steel |
| Tail wire material | 304 stainless steel |
| Shim type | Serrated shim |
| Assembly | Shell, shim, and wedge equipped with tail wire |
| Intended cable | One-pair and two-pair telephone drop wire; confirm cable dimensions and jacket compatibility |
| Attachment points | Compatible span clamps, drive hooks, and other drop attachments |
Before ordering: Request a dimensioned drawing and confirm cable fit, load rating, test conditions, and support compatibility for your installation.
The Hbcrownwealth CW-2PRXP stainless steel drop wire clamp supports one-pair and two-pair telephone drop wire at compatible span clamps, drive hooks, and other drop attachments. Its assembly combines a shell, serrated shim, and wedge equipped with a tail wire.
You can specify this model for aerial telephone service connections or replacement work that requires this clamp design. Start with your cable dimensions and attachment details, then confirm the load requirements for your route before ordering.
The body and tail wire use 304 stainless steel. This gives you a defined material specification when comparing quotations or preparing your purchasing requirements. If your project requires material certificates or exposure testing, state those requirements in your inquiry.
The serrated shim increases the hold on compatible drop wire. Specify the serrated-shim configuration when ordering CW-2PRXP so your purchasing documents identify the correct assembly. Cable jacket construction and dimensions remain important to the selection.
The clamp uses a shell, shim, and wedge with a tail wire. When replacing existing hardware, compare the complete assembly with your current clamp. This helps you identify differences in cable fit and attachment geometry before placing a bulk order.
You can use this model with compatible span clamps, drive hooks, and other telephone drop attachments. Check the connection dimensions rather than assuming that every hook or support will fit. For replacement projects, provide photographs alongside the relevant dimensions.
This product is specified for telephone drop wire. If you need hardware for fiber optic or other cable types, request a separate compatibility assessment or compare our drop wire clamp range.
Follow the approved installation instructions for the complete assembly. Do not select a working tension or span from the material grade or product appearance alone.
Hbcrownwealth is a manufacturer, supplier, and wholesaler of hardware for aerial cable, power, and telecom systems. For this product, use the model number and confirmed configuration to keep your quotation, technical review, and purchase order consistent.
For a wholesale inquiry, include your quantity, destination, and required delivery date. Also identify any sample evaluation, material documentation, inspection, or packing requirements so you can confirm the available arrangements and order terms before purchase.
It supports one-pair and two-pair telephone drop wire at compatible aerial drop attachments. You can use it with suitable span clamps, drive hooks, and other support hardware. Confirm your cable dimensions and connection details before specifying it for a new installation or replacement.
Both the body and tail wire are made from 304 stainless steel. Include this grade in your inquiry and purchase specification. If your project requires material verification, request the relevant documentation and confirm its availability before ordering.
The confirmed CW-2PRXP configuration uses a serrated shim. Its serrated surface increases the hold on compatible drop wire. If your specification calls for a neoprene shim, request a separately confirmed product configuration instead of treating the two shim types as interchangeable.
Send your cable dimensions, pair count, jacket information, and cross-sectional drawing. Pair count alone does not establish the cable fit. For replacement work, include the existing clamp details so you can compare both the gripping arrangement and the support connection.
Fiber optic cable compatibility requires separate confirmation. The stated application for CW-2PRXP is one-pair and two-pair telephone drop wire. Provide your fiber cable profile and installation requirements to request an appropriate clamp selection.
You can use compatible span clamps, drive hooks, and other drop attachments. Compare the tail-wire connection with the support fitting dimensions before purchase. Also confirm whether the quotation covers only the clamp or includes any additional mounting hardware.
You need confirmed ratings for your selected cable and clamp arrangement before specifying either value. Request the load rating, its units, test conditions, and applicable installation guidance. A pull-test result should not be treated as an allowable working load without the relevant selection criteria.
Send the CW-2PRXP model number, required quantity, cable details, and delivery destination. Specify the 304 stainless steel body and tail wire with a serrated shim. Then list any sample, documentation, packing, or delivery requirements and request confirmation of the minimum order quantity and lead time.
Contact Hbcrownwealth with your cable drawing, mounting details, and order quantity. Include your load requirements and installation environment so you can confirm the correct drop wire clamp configuration and supply terms for your project.
| Item | Specification |
|---|---|
| Model | CW-2PRXP |
| Product type | Telephone drop wire clamp |
| Body material | 304 stainless steel |
| Tail wire material | 304 stainless steel |
| Shim type | Serrated shim |
| Assembly | Shell, shim, and wedge equipped with tail wire |
| Intended cable | One-pair and two-pair telephone drop wire; confirm cable dimensions and jacket compatibility |
| Attachment points | Compatible span clamps, drive hooks, and other drop attachments |
Before ordering: Request a dimensioned drawing and confirm cable fit, load rating, test conditions, and support compatibility for your installation.
