English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Drop Wire Clamp
- CW-SWC 2–6 Aluminum Wedge Clamp for Aerial Cable
Choose the Hbcrownwealth CW-SWC aluminum wedge clamp for low-tension dead-ending of compatible self-supporting aerial drop wire. Its aluminum-alloy body and wedge grip support applications with ACSR, AAAC, and aluminum conductors, subject to size and construction confirmation.
Choose the Hbcrownwealth CW-SWC aluminum wedge clamp for low-tension dead-ending of compatible self-supporting aerial drop wire. Its aluminum-alloy body and wedge grip support applications with ACSR, AAAC, and aluminum conductors, subject to size and construction confirmation.
Use the Hbcrownwealth CW-SWC aluminum wedge clamp to dead-end compatible self-supporting drop wire in your aerial installation. It is intended for low-tension applications involving ACSR, AAAC, and aluminum conductors, subject to confirmation of your conductor size and construction.
The wedge mechanism grips the load-bearing wire as it seats inside the clamp body. Before ordering, match the clamp to your conductor and attachment arrangement rather than selecting it by appearance alone.
The 2–6 designation does not specify a unit on this product listing. Send your conductor specification so we can confirm the applicable size range before you purchase.
The wedge design holds the compatible load-bearing wire within the body. This gives you a dedicated termination component for the specified service-drop application.
You get an aluminum-alloy body with corrosion resistance for outdoor use. For coastal or chemically exposed sites, include the environment in your inquiry so you can review suitability before ordering.
Use the CW-SWC reference when requesting a quotation or repeat order. In addition, provide your conductor details to help avoid confusion between similar-looking wedge clamps.
You can consider this aluminum wedge clamp for low-tension aerial service-drop dead ends using compatible ACSR, AAAC, or aluminum conductors. Confirm the exact conductor construction, outside diameter, and required working tension for your project.
Do not assume that a clamp listed for aerial cable is suitable for every fiber cable, insulated cable, or high-tension line. If you are comparing other attachment methods, explore our aerial drop hardware range and submit your cable details for selection support.
Before installation, confirm the conductor fit, support fitting, load requirements, and approved installation procedure. The attachment arrangement must match your project design.
This listing does not provide a rated working load, installation tension, or a complete installation drawing. Request the relevant product information before specifying installation steps or applying tension. Follow the approved instructions for your selected clamp and conductor combination.
When you source from Hbcrownwealth, you can discuss this model as part of your overhead power or communication hardware purchase. Send your project requirements and order quantity so we can review your inquiry against the product information.
For a replacement order, include a drawing or clear photos of your current clamp and attachment point. This helps you compare the required configuration before confirming the purchase.
You should confirm its size convention before ordering. The existing designation does not identify whether 2–6 refers to a wire gauge or another size system, so it should not be treated as a 2–6 mm diameter range.
Yes, these conductor types are listed for low-tension use with this model, but you still need to confirm size and construction compatibility. Send the conductor datasheet and your load requirements with your inquiry.
You need separate compatibility confirmation for insulated or fiber-optic cable. An aerial installation alone does not establish suitability; the gripping surface, cable construction, and load-bearing element must match the clamp.
A rated working load or breaking load is not specified on this listing. Request the applicable technical data before selecting the clamp for a defined tension requirement.
You should use the fitting specified by your approved installation design. Provide a drawing or photo of the support point so the connection geometry and compatibility can be reviewed together.
Include model CW-SWC, conductor type and dimensions, required quantity, and delivery destination. Also state any inspection documents, packaging requirements, or target delivery date you need us to review.
Contact Hbcrownwealth for a CW-SWC quotation. Share your conductor datasheet, attachment drawing, and quantity to help us review the correct configuration for your order.
| Specification | CW-SWC |
|---|---|
| Product | 2–6 Aluminum Wedge Clamp |
| Body material | Aluminum alloy |
| Unit weight | 0.14 lb per piece |
| Application | Low-tension aerial service-drop dead-ending |
| Listed conductor types | ACSR, AAAC, and aluminum; size and construction compatibility must be confirmed |
| Size designation | 2–6; confirm the applicable unit and conductor range before ordering |
Use the Hbcrownwealth CW-SWC aluminum wedge clamp to dead-end compatible self-supporting drop wire in your aerial installation. It is intended for low-tension applications involving ACSR, AAAC, and aluminum conductors, subject to confirmation of your conductor size and construction.
The wedge mechanism grips the load-bearing wire as it seats inside the clamp body. Before ordering, match the clamp to your conductor and attachment arrangement rather than selecting it by appearance alone.
The 2–6 designation does not specify a unit on this product listing. Send your conductor specification so we can confirm the applicable size range before you purchase.
The wedge design holds the compatible load-bearing wire within the body. This gives you a dedicated termination component for the specified service-drop application.
You get an aluminum-alloy body with corrosion resistance for outdoor use. For coastal or chemically exposed sites, include the environment in your inquiry so you can review suitability before ordering.
Use the CW-SWC reference when requesting a quotation or repeat order. In addition, provide your conductor details to help avoid confusion between similar-looking wedge clamps.
You can consider this aluminum wedge clamp for low-tension aerial service-drop dead ends using compatible ACSR, AAAC, or aluminum conductors. Confirm the exact conductor construction, outside diameter, and required working tension for your project.
Do not assume that a clamp listed for aerial cable is suitable for every fiber cable, insulated cable, or high-tension line. If you are comparing other attachment methods, explore our aerial drop hardware range and submit your cable details for selection support.
Before installation, confirm the conductor fit, support fitting, load requirements, and approved installation procedure. The attachment arrangement must match your project design.
This listing does not provide a rated working load, installation tension, or a complete installation drawing. Request the relevant product information before specifying installation steps or applying tension. Follow the approved instructions for your selected clamp and conductor combination.
When you source from Hbcrownwealth, you can discuss this model as part of your overhead power or communication hardware purchase. Send your project requirements and order quantity so we can review your inquiry against the product information.
For a replacement order, include a drawing or clear photos of your current clamp and attachment point. This helps you compare the required configuration before confirming the purchase.
You should confirm its size convention before ordering. The existing designation does not identify whether 2–6 refers to a wire gauge or another size system, so it should not be treated as a 2–6 mm diameter range.
Yes, these conductor types are listed for low-tension use with this model, but you still need to confirm size and construction compatibility. Send the conductor datasheet and your load requirements with your inquiry.
You need separate compatibility confirmation for insulated or fiber-optic cable. An aerial installation alone does not establish suitability; the gripping surface, cable construction, and load-bearing element must match the clamp.
A rated working load or breaking load is not specified on this listing. Request the applicable technical data before selecting the clamp for a defined tension requirement.
You should use the fitting specified by your approved installation design. Provide a drawing or photo of the support point so the connection geometry and compatibility can be reviewed together.
Include model CW-SWC, conductor type and dimensions, required quantity, and delivery destination. Also state any inspection documents, packaging requirements, or target delivery date you need us to review.
Contact Hbcrownwealth for a CW-SWC quotation. Share your conductor datasheet, attachment drawing, and quantity to help us review the correct configuration for your order.
| Specification | CW-SWC |
|---|---|
| Product | 2–6 Aluminum Wedge Clamp |
| Body material | Aluminum alloy |
| Unit weight | 0.14 lb per piece |
| Application | Low-tension aerial service-drop dead-ending |
| Listed conductor types | ACSR, AAAC, and aluminum; size and construction compatibility must be confirmed |
| Size designation | 2–6; confirm the applicable unit and conductor range before ordering |
