English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Drop Wire Clamp
- CW-MWC Medium Wedge Clamp (1/0–#4), Non-Irridite
Choose the CW-MWC medium wedge clamp for low-tension dead-ending of compatible aerial service-drop conductors. You get an aluminum body, stainless steel bail wire, and the listed 1/0–#4 configuration for ACSR, AAAC, or aluminum conductor applications.
Choose the CW-MWC medium wedge clamp for low-tension dead-ending of compatible aerial service-drop conductors. You get an aluminum body, stainless steel bail wire, and the listed 1/0–#4 configuration for ACSR, AAAC, or aluminum conductor applications.
Choose the Hbcrownwealth CW-MWC medium wedge clamp when your aerial service-drop project calls for the listed 1/0–#4 configuration. You get an aluminum body and stainless steel bail wire for low-tension dead-ending of compatible self-supporting drop wire.
You can use this service wedge clamp with compatible ACSR, AAAC, or aluminum conductors. Before ordering, confirm your conductor size, construction, and required load against the CW-MWC specification.
The listed strength does not identify a working-load limit or a breaking-load test basis. Confirm the applicable rating and conductor fit before specifying this clamp for your project.
The aluminum body grips the compatible conductor, while the stainless steel bail provides the attachment loop. This material combination offers corrosion resistance for outdoor applications. Include any coastal or industrial exposure conditions in your inquiry.
The wedge mechanism secures the load-bearing wire within the clamp body. You can consider this configuration for the low-tension conductor applications listed above, rather than assuming it suits every overhead cable.
The original product configuration allows attachment to a compatible bare neutral at a suitable point in the span and supports drop-wire sag adjustment. As a result, you can plan the attachment location around your approved installation design. Follow the specified tensioning procedure when setting the final sag.
Use the CW-MWC medium wedge clamp for compatible self-supporting aerial service drops and low-tension dead-ending of ACSR, AAAC, or aluminum conductors. Check both the conductor specification and the support connection before ordering.
If you are comparing sizes, review the CW-SWC aluminum wedge clamp as a separate model. Do not assume that the two clamps are interchangeable: CW-MWC carries the 1/0–#4 designation and a listed strength of 1,200 lbs.
Provide your conductor datasheet and attachment drawing before installation. Confirm the size convention, support-fitting geometry, applicable load rating, and approved sag requirements with your project team.
Use the installation instructions for the confirmed clamp and conductor combination. Do not determine installation tension from the 1,200 lbs figure alone, and do not assume compatibility with insulated or fiber-optic cable without a separate review.
Hbcrownwealth supplies overhead power and communication hardware for project and wholesale purchasing. You can identify this product by model CW-MWC and submit your conductor details, quantity, and delivery requirements for a quotation.
For repeat orders, include your approved drawing or previous specification. This helps you keep the model, material requirements, and attachment arrangement consistent across purchases.
It identifies the size designation listed for the CW-MWC medium wedge clamp. Provide your conductor datasheet so we can confirm the applicable gauge convention and fit; do not interpret the designation as a millimeter diameter range.
The listing does not establish that 1,200 lbs is a safe working load. It labels the value only as strength. Request the rating definition and relevant technical documentation before using it in your load assessment.
Non-Irridite is the finish designation used for this model in the product specification. If your project requires a particular surface treatment, confirm the exact finish before ordering. This designation alone does not establish a coating standard or corrosion-test result.
CW-MWC is listed as Medium, 1/0–#4, with a strength of 1,200 lbs and stainless steel bail wire. CW-SWC is a separate 2–6 model. Compare the confirmed conductor range and load data before selecting either model as a replacement.
Yes, attachment to a compatible bare neutral is a listed application. Your conductor size, attachment position, and load requirements still need to match the approved service-drop design.
Send model CW-MWC, conductor type and size, order quantity, and destination. Also include your required finish, load criteria, attachment drawing, and any inspection documentation you need us to review.
Contact Hbcrownwealth for a medium wedge clamp quotation. Share your project specifications so we can review the product configuration and supply requirements with you.
| Specification | CW-MWC |
|---|---|
| Product | Medium Wedge Clamp |
| Size designation | 1/0–#4; confirm conductor fit before ordering |
| Body material | Aluminum |
| Bail wire material | Stainless steel |
| Listed strength | 1,200 lbs; rating basis to be confirmed |
| Finish designation | Non-Irridite |
| Application | Low-tension dead-ending of compatible self-supporting drop wire |
| Conductor types | ACSR, AAAC, and aluminum, subject to size and construction compatibility |
Choose the Hbcrownwealth CW-MWC medium wedge clamp when your aerial service-drop project calls for the listed 1/0–#4 configuration. You get an aluminum body and stainless steel bail wire for low-tension dead-ending of compatible self-supporting drop wire.
You can use this service wedge clamp with compatible ACSR, AAAC, or aluminum conductors. Before ordering, confirm your conductor size, construction, and required load against the CW-MWC specification.
The listed strength does not identify a working-load limit or a breaking-load test basis. Confirm the applicable rating and conductor fit before specifying this clamp for your project.
The aluminum body grips the compatible conductor, while the stainless steel bail provides the attachment loop. This material combination offers corrosion resistance for outdoor applications. Include any coastal or industrial exposure conditions in your inquiry.
The wedge mechanism secures the load-bearing wire within the clamp body. You can consider this configuration for the low-tension conductor applications listed above, rather than assuming it suits every overhead cable.
The original product configuration allows attachment to a compatible bare neutral at a suitable point in the span and supports drop-wire sag adjustment. As a result, you can plan the attachment location around your approved installation design. Follow the specified tensioning procedure when setting the final sag.
Use the CW-MWC medium wedge clamp for compatible self-supporting aerial service drops and low-tension dead-ending of ACSR, AAAC, or aluminum conductors. Check both the conductor specification and the support connection before ordering.
If you are comparing sizes, review the CW-SWC aluminum wedge clamp as a separate model. Do not assume that the two clamps are interchangeable: CW-MWC carries the 1/0–#4 designation and a listed strength of 1,200 lbs.
Provide your conductor datasheet and attachment drawing before installation. Confirm the size convention, support-fitting geometry, applicable load rating, and approved sag requirements with your project team.
Use the installation instructions for the confirmed clamp and conductor combination. Do not determine installation tension from the 1,200 lbs figure alone, and do not assume compatibility with insulated or fiber-optic cable without a separate review.
Hbcrownwealth supplies overhead power and communication hardware for project and wholesale purchasing. You can identify this product by model CW-MWC and submit your conductor details, quantity, and delivery requirements for a quotation.
For repeat orders, include your approved drawing or previous specification. This helps you keep the model, material requirements, and attachment arrangement consistent across purchases.
It identifies the size designation listed for the CW-MWC medium wedge clamp. Provide your conductor datasheet so we can confirm the applicable gauge convention and fit; do not interpret the designation as a millimeter diameter range.
The listing does not establish that 1,200 lbs is a safe working load. It labels the value only as strength. Request the rating definition and relevant technical documentation before using it in your load assessment.
Non-Irridite is the finish designation used for this model in the product specification. If your project requires a particular surface treatment, confirm the exact finish before ordering. This designation alone does not establish a coating standard or corrosion-test result.
CW-MWC is listed as Medium, 1/0–#4, with a strength of 1,200 lbs and stainless steel bail wire. CW-SWC is a separate 2–6 model. Compare the confirmed conductor range and load data before selecting either model as a replacement.
Yes, attachment to a compatible bare neutral is a listed application. Your conductor size, attachment position, and load requirements still need to match the approved service-drop design.
Send model CW-MWC, conductor type and size, order quantity, and destination. Also include your required finish, load criteria, attachment drawing, and any inspection documentation you need us to review.
Contact Hbcrownwealth for a medium wedge clamp quotation. Share your project specifications so we can review the product configuration and supply requirements with you.
| Specification | CW-MWC |
|---|---|
| Product | Medium Wedge Clamp |
| Size designation | 1/0–#4; confirm conductor fit before ordering |
| Body material | Aluminum |
| Bail wire material | Stainless steel |
| Listed strength | 1,200 lbs; rating basis to be confirmed |
| Finish designation | Non-Irridite |
| Application | Low-tension dead-ending of compatible self-supporting drop wire |
| Conductor types | ACSR, AAAC, and aluminum, subject to size and construction compatibility |
