English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Drop Wire Clamp
- CWC-ESD: Universal Fiber Drop Clamp
The CWC-ESD universal fiber drop clamp uses an elongated stainless steel assembly to support compatible fiber drop cables and 1–2 twisted pair drop cables. Published maximum support ratings are 400 lb for fiber and 550 lb for twisted pair; confirm your cable fit and application requirements before ordering.
The CWC-ESD universal fiber drop clamp uses an elongated stainless steel assembly to support compatible fiber drop cables and 1–2 twisted pair drop cables. Published maximum support ratings are 400 lb for fiber and 550 lb for twisted pair; confirm your cable fit and application requirements before ordering.
The CWC-ESD universal fiber drop clamp supports compatible fiber drop cables and 1–2 twisted pair drop cables in aerial telecommunications installations. Its elongated body spreads compression over a larger cable contact area, while the shell, wedge and shim form the clamping assembly.
If you source hardware for both fiber and twisted pair service drops, this model gives you one clamp design to evaluate for the two applications. Match your cable construction and load requirements to the appropriate rating before ordering.
| Item | Specification |
|---|---|
| Model | CWC-ESD |
| Product | Universal Fiber Drop Clamp |
| Cable applications | Compatible fiber drop cables and 1–2 twisted pair drop cables |
| Shell, wedge and shim material | 201/304 stainless steel; confirm the supplied grade when ordering |
| Tail wire material | Dead-soft 430 stainless steel |
| Shim type | Dimpled |
| Body design | Elongated compression clamp |
| Cable type | Published maximum support rating |
|---|---|
| Fiber drop cable | 400 lb |
| 1–2 twisted pair drop cable | 550 lb |
Ratings depend on the cable application. Confirm the cable construction, test conditions and permitted working load for your installation; do not apply the 550 lb rating to fiber drop cable.
You can consider this clamp for fiber service drops in FTTH access networks and for 1–2 twisted pair telecommunications drop cables. “Universal” describes the product’s intended cable applications; it does not establish compatibility with every cable size or construction.
For selection, provide your cable width and thickness or diameter, jacket material, support-member layout and required load. For fiber cable, include your allowable attenuation change and any project testing requirements. Also check the attachment hardware used at the support point.
Compare other configurations in our drop wire clamp range if your cable profile or installation requirements differ.
Request the installation drawing for the CWC-ESD and your proposed cable before field use. Confirm the cable position, shim orientation, wedge engagement and tail-wire connection against that drawing.
Your installation plan should specify the allowable cable tension and support arrangement. For fiber drops, verify optical performance against your project’s acceptance criteria after installation. The published support ratings alone do not define span length, installation tension or a safety factor.
The shell, wedge and shim are stamped stainless steel components, and the tail wire is formed from dead-soft 430 stainless steel. When your specification calls for SS201 or SS304, identify the required grade for the stamped parts in your inquiry.
Hbcrownwealth is a manufacturer, supplier and wholesaler of hardware for overhead power and telecommunications systems. You can source this clamp alongside related aerial drop hardware. Include any material documentation, inspection, sample or customization requirements for review before an order is confirmed.
The CWC-ESD is designed for compatible fiber drop cables and 1–2 twisted pair drop cables. Send your cable dimensions and construction drawing to confirm the fit; the product name does not specify a universal dimensional range.
The published maximum is 400 lb for fiber drop cable and 550 lb for 1–2 twisted pair drop cable. These figures apply to different cable applications. Confirm the relevant test conditions and permitted working load for your project.
No. The shell, wedge and shim are listed as 201/304 stainless steel, while the tail wire is dead-soft 430 stainless steel. Specify the required grade for the stamped parts and confirm the supplied configuration before purchasing.
The product specification lists a dimpled shim. The design description also refers to perforations that engage the cable’s support members. If shim geometry is critical to your cable, request a drawing or sample to confirm the exact contact profile.
Optical performance must be verified with your specific cable and installation conditions. The elongated clamp and shim are designed to grip the supporting members while limiting fiber stress, but you should confirm the allowable attenuation change and test method for your project.
Include model CWC-ESD, cable type and dimensions, required quantity and delivery destination. Also state the stamped-part material grade, required load, attachment arrangement and any optical testing or inspection requirements.
Contact Hbcrownwealth with your cable datasheet or cross-section drawing and purchase quantity. We can review your intended application and quotation requirements for the universal fiber drop clamp.
| Item | Specification |
|---|---|
| Model | CWC-ESD |
| Product | Universal Fiber Drop Clamp |
| Cable applications | Compatible fiber drop cables and 1–2 twisted pair drop cables |
| Shell, wedge and shim material | 201/304 stainless steel; confirm the supplied grade when ordering |
| Tail wire material | Dead-soft 430 stainless steel |
| Shim type | Dimpled |
| Body design | Elongated compression clamp |
| Cable type | Published maximum support rating |
|---|---|
| Fiber drop cable | 400 lb |
| 1–2 twisted pair drop cable | 550 lb |
Ratings depend on the cable application. Confirm the cable construction, test conditions and permitted working load for your installation; do not apply the 550 lb rating to fiber drop cable.
The CWC-ESD universal fiber drop clamp supports compatible fiber drop cables and 1–2 twisted pair drop cables in aerial telecommunications installations. Its elongated body spreads compression over a larger cable contact area, while the shell, wedge and shim form the clamping assembly.
If you source hardware for both fiber and twisted pair service drops, this model gives you one clamp design to evaluate for the two applications. Match your cable construction and load requirements to the appropriate rating before ordering.
| Item | Specification |
|---|---|
| Model | CWC-ESD |
| Product | Universal Fiber Drop Clamp |
| Cable applications | Compatible fiber drop cables and 1–2 twisted pair drop cables |
| Shell, wedge and shim material | 201/304 stainless steel; confirm the supplied grade when ordering |
| Tail wire material | Dead-soft 430 stainless steel |
| Shim type | Dimpled |
| Body design | Elongated compression clamp |
| Cable type | Published maximum support rating |
|---|---|
| Fiber drop cable | 400 lb |
| 1–2 twisted pair drop cable | 550 lb |
Ratings depend on the cable application. Confirm the cable construction, test conditions and permitted working load for your installation; do not apply the 550 lb rating to fiber drop cable.
You can consider this clamp for fiber service drops in FTTH access networks and for 1–2 twisted pair telecommunications drop cables. “Universal” describes the product’s intended cable applications; it does not establish compatibility with every cable size or construction.
For selection, provide your cable width and thickness or diameter, jacket material, support-member layout and required load. For fiber cable, include your allowable attenuation change and any project testing requirements. Also check the attachment hardware used at the support point.
Compare other configurations in our drop wire clamp range if your cable profile or installation requirements differ.
Request the installation drawing for the CWC-ESD and your proposed cable before field use. Confirm the cable position, shim orientation, wedge engagement and tail-wire connection against that drawing.
Your installation plan should specify the allowable cable tension and support arrangement. For fiber drops, verify optical performance against your project’s acceptance criteria after installation. The published support ratings alone do not define span length, installation tension or a safety factor.
The shell, wedge and shim are stamped stainless steel components, and the tail wire is formed from dead-soft 430 stainless steel. When your specification calls for SS201 or SS304, identify the required grade for the stamped parts in your inquiry.
Hbcrownwealth is a manufacturer, supplier and wholesaler of hardware for overhead power and telecommunications systems. You can source this clamp alongside related aerial drop hardware. Include any material documentation, inspection, sample or customization requirements for review before an order is confirmed.
The CWC-ESD is designed for compatible fiber drop cables and 1–2 twisted pair drop cables. Send your cable dimensions and construction drawing to confirm the fit; the product name does not specify a universal dimensional range.
The published maximum is 400 lb for fiber drop cable and 550 lb for 1–2 twisted pair drop cable. These figures apply to different cable applications. Confirm the relevant test conditions and permitted working load for your project.
No. The shell, wedge and shim are listed as 201/304 stainless steel, while the tail wire is dead-soft 430 stainless steel. Specify the required grade for the stamped parts and confirm the supplied configuration before purchasing.
The product specification lists a dimpled shim. The design description also refers to perforations that engage the cable’s support members. If shim geometry is critical to your cable, request a drawing or sample to confirm the exact contact profile.
Optical performance must be verified with your specific cable and installation conditions. The elongated clamp and shim are designed to grip the supporting members while limiting fiber stress, but you should confirm the allowable attenuation change and test method for your project.
Include model CWC-ESD, cable type and dimensions, required quantity and delivery destination. Also state the stamped-part material grade, required load, attachment arrangement and any optical testing or inspection requirements.
Contact Hbcrownwealth with your cable datasheet or cross-section drawing and purchase quantity. We can review your intended application and quotation requirements for the universal fiber drop clamp.
| Item | Specification |
|---|---|
| Model | CWC-ESD |
| Product | Universal Fiber Drop Clamp |
| Cable applications | Compatible fiber drop cables and 1–2 twisted pair drop cables |
| Shell, wedge and shim material | 201/304 stainless steel; confirm the supplied grade when ordering |
| Tail wire material | Dead-soft 430 stainless steel |
| Shim type | Dimpled |
| Body design | Elongated compression clamp |
| Cable type | Published maximum support rating |
|---|---|
| Fiber drop cable | 400 lb |
| 1–2 twisted pair drop cable | 550 lb |
Ratings depend on the cable application. Confirm the cable construction, test conditions and permitted working load for your installation; do not apply the 550 lb rating to fiber drop cable.
