English
Spanish
French
ArabicElectric Pole Accessories
- Home
- Products
- Drop Wire Clamp
- CW-LWC Large Wedge Clamp (4/0–2/0), Non-Irridite
The CW-LWC large wedge clamp helps you dead-end self-supporting drop wire in low-tension overhead service applications. Its aluminum body and stainless steel bail wire grip compatible ACSR, AAAC, and aluminum conductors. Choose this Non-Irridite model for the listed 4/0–2/0 size designation, subject to confirmation of your conductor specifications.
The CW-LWC large wedge clamp helps you dead-end self-supporting drop wire in low-tension overhead service applications. Its aluminum body and stainless steel bail wire grip compatible ACSR, AAAC, and aluminum conductors. Choose this Non-Irridite model for the listed 4/0–2/0 size designation, subject to confirmation of your conductor specifications.
The CW-LWC large wedge clamp is an aluminum service clamp for dead-ending self-supporting drop wire. You can use it with compatible ACSR, AAAC, and aluminum conductors in low-tension applications. Its listed size designation is 4/0–2/0, and its published strength value is 1,600 lbs.
Hbcrownwealth supplies this Non-Irridite model for your overhead line hardware requirements. Before ordering, match the clamp to your conductor construction, attachment arrangement, and project load requirements.
Use the CW-LWC for low-tension dead-ending of self-supporting service drop wire where the conductor and support arrangement match the clamp. In particular, confirm the bare-neutral dimensions and construction before selecting it for your assembly.
The 4/0–2/0 designation alone does not establish compatibility with every conductor in that range. Send your conductor datasheet or drawing so you can confirm the size notation, outside diameter, and stranding before purchase.
| Selection point | CW-LWC | CW-MWC |
|---|---|---|
| Model size | Large | Medium |
| Listed size designation | 4/0–2/0 | 1/0–#4 |
| Published strength | 1,600 lbs | 1,200 lbs |
| Product designation | Non-Irridite | Non-Irridite |
Choose the model that matches your conductor, rather than selecting only by the higher strength number. You can also review the CW-MWC medium wedge clamp specifications for comparison. Neither published strength value is identified as a working load limit or breaking load.
Before installation, confirm your conductor size and material, support hardware, required tension, and sag criteria. Then request the applicable installation instructions for your assembly. The available product data does not specify installation torque, permitted working load, or a detailed fitting sequence.
Although bare-neutral attachment and sag adjustment are listed product features, your project requirements determine the final installation arrangement.
It is the listed size designation for the CW-LWC large model. Confirm the applicable sizing system and your actual conductor diameter and stranding with Hbcrownwealth before ordering; the designation should not be treated as a diameter in millimeters.
No working load limit is stated in the available product data. The value is labeled only as strength, so you should confirm its definition and the applicable load requirements before using it in your design.
Do not assume the two models are interchangeable. CW-LWC carries the 4/0–2/0 designation, while CW-MWC carries 1/0–#4. Your conductor fit and application requirements determine which model you need.
Yes, bare-neutral attachment along the span is a listed feature. Confirm that your neutral conductor and attachment arrangement are compatible with the CW-LWC before installation.
No coating certification is stated in the available product information. Non-Irridite is the product designation; if your project specifies a surface treatment or corrosion test, include that requirement in your inquiry for confirmation.
Provide the CW-LWC model, required quantity, and your conductor specifications first. Also include the intended application, load requirements, destination, and any drawings or inspection requirements so Hbcrownwealth can review your request.
To source this large wedge clamp for your project or wholesale order, contact Hbcrownwealth with your conductor datasheet and purchasing requirements. Ask for confirmation of compatibility, the strength rating definition, and current supply terms before placing your order.
| Parameter | Specification |
|---|---|
| Part number | CW-LWC |
| Product type | Large service wedge clamp |
| Listed size designation | 4/0–2/0; confirm conductor sizing system and compatibility |
| Body material | Aluminum |
| Bail wire material | Stainless steel |
| Published strength | 1,600 lbs; rating definition to be confirmed |
| Designation | Non-Irridite |
| Conductor types | Compatible ACSR, AAAC, and aluminum conductors |
| Application | Low-tension dead-ending of self-supporting drop wire |
The published strength is not identified as a working load limit or breaking load. Confirm the rating basis and your conductor specifications before selection.
The CW-LWC large wedge clamp is an aluminum service clamp for dead-ending self-supporting drop wire. You can use it with compatible ACSR, AAAC, and aluminum conductors in low-tension applications. Its listed size designation is 4/0–2/0, and its published strength value is 1,600 lbs.
Hbcrownwealth supplies this Non-Irridite model for your overhead line hardware requirements. Before ordering, match the clamp to your conductor construction, attachment arrangement, and project load requirements.
Use the CW-LWC for low-tension dead-ending of self-supporting service drop wire where the conductor and support arrangement match the clamp. In particular, confirm the bare-neutral dimensions and construction before selecting it for your assembly.
The 4/0–2/0 designation alone does not establish compatibility with every conductor in that range. Send your conductor datasheet or drawing so you can confirm the size notation, outside diameter, and stranding before purchase.
| Selection point | CW-LWC | CW-MWC |
|---|---|---|
| Model size | Large | Medium |
| Listed size designation | 4/0–2/0 | 1/0–#4 |
| Published strength | 1,600 lbs | 1,200 lbs |
| Product designation | Non-Irridite | Non-Irridite |
Choose the model that matches your conductor, rather than selecting only by the higher strength number. You can also review the CW-MWC medium wedge clamp specifications for comparison. Neither published strength value is identified as a working load limit or breaking load.
Before installation, confirm your conductor size and material, support hardware, required tension, and sag criteria. Then request the applicable installation instructions for your assembly. The available product data does not specify installation torque, permitted working load, or a detailed fitting sequence.
Although bare-neutral attachment and sag adjustment are listed product features, your project requirements determine the final installation arrangement.
It is the listed size designation for the CW-LWC large model. Confirm the applicable sizing system and your actual conductor diameter and stranding with Hbcrownwealth before ordering; the designation should not be treated as a diameter in millimeters.
No working load limit is stated in the available product data. The value is labeled only as strength, so you should confirm its definition and the applicable load requirements before using it in your design.
Do not assume the two models are interchangeable. CW-LWC carries the 4/0–2/0 designation, while CW-MWC carries 1/0–#4. Your conductor fit and application requirements determine which model you need.
Yes, bare-neutral attachment along the span is a listed feature. Confirm that your neutral conductor and attachment arrangement are compatible with the CW-LWC before installation.
No coating certification is stated in the available product information. Non-Irridite is the product designation; if your project specifies a surface treatment or corrosion test, include that requirement in your inquiry for confirmation.
Provide the CW-LWC model, required quantity, and your conductor specifications first. Also include the intended application, load requirements, destination, and any drawings or inspection requirements so Hbcrownwealth can review your request.
To source this large wedge clamp for your project or wholesale order, contact Hbcrownwealth with your conductor datasheet and purchasing requirements. Ask for confirmation of compatibility, the strength rating definition, and current supply terms before placing your order.
| Parameter | Specification |
|---|---|
| Part number | CW-LWC |
| Product type | Large service wedge clamp |
| Listed size designation | 4/0–2/0; confirm conductor sizing system and compatibility |
| Body material | Aluminum |
| Bail wire material | Stainless steel |
| Published strength | 1,600 lbs; rating definition to be confirmed |
| Designation | Non-Irridite |
| Conductor types | Compatible ACSR, AAAC, and aluminum conductors |
| Application | Low-tension dead-ending of self-supporting drop wire |
The published strength is not identified as a working load limit or breaking load. Confirm the rating basis and your conductor specifications before selection.
